NanTai

Tubing Specialists

Silicone tubing ideal for applications that require non toxicity, resistance to extreme temperature variation and a very good electrical properties as an excellent insulator.

NAN TAI's professional manufacturing facilities is designed to produce NT series silicone tubing products that suits to industrial, dairy, food and beverage applications which offer distinguish performance at an attractive cost.

﹡Besides tubing product, all kinds of silicone rubber extrusion products is available

INSR20N

Silicone tube:
NSR-20M (UL-standard)

high temperature variation:

-50°C to 200°C

high dielectric breakdown:

0.5mm T at 6.0 kv
1.0 mm T at 9.0 kv

UL VW-1 flame-retardance approval

FSR38/38RB

Silicone tube:
FSR-38, FSR-38RB

made from ingrediants which comply with FDA

extreme temperature variation:

-50°C to 200°C

odorless, tasteless, inert and stainless

stretchable and high compression resistance

low water absorption

Silicone Rubber Tubes

	Product No.	Comply with
Tranparent standard silicone tube	RSR-20
Flame retantant SiliconeRubber tube	NSR-20M-4M	UL-VWI E207162
Food grade SiliconeRubber tube	FSR-38 (Transparent) FSR-38RB (Reddish)	FDA 21 CFR 177.2600

Physical Properties

Dielectric Strength	≧ 4.0KV
Specific Gravity	1.2
Hardness Shore A	60 ± 2
Tensile Strength MPa	≧ 6.5
Tear Strength N/mm	≧ 1.4
Elongation %	296
Shrinkage Rate %	265
Compression set % 22Hr @177C	30
Temperature Transmutation	-50°C ± 200°C

Inner diameter mm	Tolerance	Wall thickness mm	minimum
1.0	+-0.2	0.5	0.38
1.2	+-0.2	0.5	0.38
1.5	+0.4-0.2	0.5	0.38
2.0	+0.4-0.2	0.5	0.38
2.5	+0.4-0.2	0.5	0.38
3.0	+0.4-0.3	0.5	0.38
3.5	+0.4-0.3	0.5	0.38
4.0	+0.5-0.4	0.5	0.38
4.5	+0.5-0.4	0.5	0.38
5.0	+0.5-0.4	0.5	0.38
6.0	+1.0-0.5	0.5	0.38
7.0	+1.0-0.5	0.7	0.56
8.0	+1.0-0.5	0.7	0.56
9.0	+1.0-0.5	0.8	0.69
10.0	+1.0-0.5	0.8	0.69
11.0	+1.0-0.5	0.8	0.69
12.0	+1.0-0.5	0.9	0.77
13.0	+1.0-0.5	0.9	0.77
14.0	+1.0-0.5	0.9	0.77
15.0	+1.0-0.5	0.9	0.77
16.0	+1.0-0.5	0.9	0.77
17.0	+1.0-0.6	0.9	0.77
18.0	+1.0-0.6	0.9	0.77
19.0	+1.0-0.6	1.0	0.89
20.0	+1.0-0.6	1.0	0.89

Inner diameter mm	Tolerance	Wall thickness mm	minimum
1.0	+-0.2	1.0	0.762
1.2	+-0.2	1.0	0.762
1.5	+0.4-0.2	1.0	0.762
2.0	+0.4-0.2	1.0	0.762
2.5	+0.4-0.2	1.0	0.762
3.0	+0.4-0.3	1.0	0.762
3.5	+0.4-0.3	1.0	0.762
4.0	+0.5-0.4	1.0	0.762
4.5	+0.5-0.4	1.0	0.762
5.0	+0.5-0.4	1.0	0.762
6.0	+1.0-0.5	1.0	0.762
7.0	+1.0-0.5	1.0	0.762
8.0	+1.0-0.5	1.0	0.762
9.0	+1.0-0.5	1.0	0.762
10.0	+1.0-0.5	1.0	0.762
11.0	+1.0-0.5	1.0	0.762
12.0	+1.0-0.5	1.0	0.762
13.0	+1.0-0.5	1.0	0.762
14.0	+1.0-0.5	1.0	0.762
15.0	+1.0-0.5	1.0	0.762
16.0	+1.0-0.5	1.0	0.762
17.0	+1.0-0.6	1.1	0.89
18.0	+1.0-0.6	1.1	0.89
19.0	+1.0-0.6	1.1	0.89
20.0	+1.0-0.6	1.1	0.89